Description
For clean, pure, crystal clear pool water, simply add salt.
Features:
FILTRATION MANAGEMENT
- By calculating the time according to the pool temperature (automatic mode).
- By programming on a 24-hour cycle.
- By the priority that can be given to RedOx regulation (if the value of this reference falls below the set value, filtration starts at the next full hour).
- Possibility to choose the start time and the end time for switching on the filtration in automatic mode.
- Possibility of increasing or decreasing the filtration time depending on the use of the swimming pool (economy mode=little frequented pool, turbo mode=very busy pool) or default + or – 30% (modifiable value).
- Possibility of switching to "SHOCK" mode (forcing filtration and electrolyser for 24 hours).
CONTROL OF A SALT ELECTROLYZER AND A DISINFECTANT DOSING PUMP :
- By integrating the information provided via the RedOx probe.
- Possibility of winterizing the chlorinator below 15°C to avoid premature wear of the electrodes.
CONTROLLING A PH PUMP:
- By integrating the information provided via the pH probe. SOLEO also allows viewing on its screen (in the technical room).
TECHNICAL CHARACTERISTICS
Nominal production of disinfectant:
- 75m3 model: 13.30 g/h
- 150m3 model: 26.60 g/h
- Recommended salt level: From 3 to 4.5 g/l (Ideal 3.5 g/l)
- Cell life: 10,000 h
- Cell connection diameter: ø 63 mm
- Minimum flow to purge air from the cell: 6 m3 /h
- Maximum flow rate (beyond compulsory bypass): 18 m3 /h
- Min / max water temperature : 11°C / 40°C
- Cable length between cabinet and cell: 4.5 m