Description
AQUA MUSIQUE built-in aquatic loudspeaker, high performance in waterproof ABS, 50 watts delivered with the recessed recess kit for masonry and liner swimming pools.
The built-in niche is suitable for traditional concrete pools, monocoque polyester pools, steel structure, and aluminum.
Immerse the AQUA MUSIQUE anti-stress speaker in your pool and turn your water into music.
It will bring you the benefits of underwater musical massage.
New relaxation technique used by customers of thalassotherapy and well-being centers to find calm and serenity without any further effort.
For a 6m x 4m pool, provide a fixed built-in AQUA MUSIQUE speaker beyond these dimensions, provide a second fixed built-in AQUA MUSIC speaker for better distribution of aquatic music (free study and estimate for any type of pool).
Supplied with a flush-mounting kit identical to that of an aquatic light projector. This loudspeaker is suitable for all swimming pools, for individuals and communities.
The materials that compose it allow it to be very resistant to chlorinated water and completely waterproof.
- Simple installation
- It can be leaned against a pool wall 1m deep.
- It comes with 3 meters of cable.
- With a power of 50 W under 8 Ω, it has a high sound pressure for a range of approximately 12 m under water.
- For safe use at high impedance, a transformer is required.
- For use with an amplifier greater than 50 watts, a 45 watt LIMITER is required.
Features:
- Frequency: 100 – 16 kHz
- Directivity: Omnidirectional
- Power: 50 watts / 8 ohms
- Impedance: 8 Ohms nominal
- Positioning: 30 cm – 1 m
- Dimensions: 30 x 17cm
- Weight: 5kg
- Cable length: 3m
- Materials: POT & FRONT / ABS
- Speakers / Polyurethane
- 2 years warranty
Embedded niche, overall dimensions: ø 260 mm – Depth: 165 mm;
provided with ridges on the inside for better hold. Underwater loudspeaker support intended for swimming pools whose coating does not require a gasket or sealing flange: coatings, paints, tiles, glass paste, resins applied to masonry and generally any other equivalent coating.
- Cable conduit 2 ends ø 20 x 27 length 0.90 m.
- Clips and stainless steel screws: facilitates installation – Aesthetics: no visible stainless steel screws.
- Cable outlet from the side or from the bottom, with sealing by screw cable gland.
- 3m cable section 2 x 1.5 mm2.
- Trim in white anti-UV treated ABS ø 270 mm.