Description
Above ground swimming pools RIGID WALL Garden Leisure
Wall
The wall of an above-ground swimming pool is often made of galvanized steel. It is expected to hold over 90,000 liters of water for as long as the pool is in place, so it needs to be sturdy. Galvanized steel is corrugated and covered with vinyl or other material. The more layers there are on the steel, the more durable it is.
Frame
The frame secures the wall and reinforces the pool.
Top rails
The top rails are the upper edge of the pool. The rails connect each post and are durable.
Hanging
The hook passes between the wall and the upper rails. It is called “liner hooking”. It holds the pool liner and wall in place.
Amounts
The uprights are support posts for the top and frame.
Vinyl siding
The vinyl liner covers the inside of the pool. The liner adapts specifically to your pool.
Composition of the Complete Structure and Accessories Kit, includes the wall and all the accessories below:
Skimmer
The skimmer is an opening near the top of the pool, where it filters out some debris before the water passes through your filter. It captures floating debris. It often has a flap that keeps floating debris inside the skimmer and away from the surface of your pool. Inside the skimmer there is a basket that you can empty. Keeping the basket empty will help keep your pool filter working to the best of its ability. You can also plug a pool vacuum into the skimmer.
Pump and filtration system
The pump and filter should be located near the pool and connected to the skimmer, where the water is sucked up and filtered before returning to the pool. The Garden Leisure swimming pool is equipped with a sand filter. You should backwash when the pressure indicated on the pressure gauge is too high. Backwashing involves reversing the flow of water through the filter media to remove it.